block26 zero hardware magazine, spring-powered, slide lock without TPU
Print Profile(3)
Description
This modified case functions exactly like the original, with comparable performance and capacity. It works correctly when assembled directly after printing. PETG printing is recommended.
Printed springs have a certain durability, but performance may decrease with prolonged use. It is recommended to print some spares.
Some notes:
When installing here, it is best to put two drops of 502 super glue in the gap at the back for higher reliability
The base will be slightly harder to install than the original. Make sure the filament has passed completely through the fixing hole.
After installation, check if the downward pressure is smooth and confirm it does not get stuck. Otherwise, forcing it in will damage the slide lock.
Other important notes: This gun was not designed by me. Please purchase the original main model from the original author's channels.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)