Animal Flower Pot Decor Set – 4 Decorative Figures

Animal Flower Pot Decor Set – 4 Decorative Pot Figures for Home & Garden (Ø 80 mm) | cubisten lab

The Animal Flower Pot Decor Set from Cubisten Lab includes four decorative animal figures designed to enhance flower pots in both home and garden environments.

With an original size of 80 mm and a default 80 mm pot diameter, the models fit common planters and can easily be resized in Bambu Studio to match different pot sizes.

These decorative figures add character and charm to indoor plants, balconies, terraces, and garden areas. Developed using the Cubisten Lab setup, the models offer reliable printability and consistent visual quality when printed with proper supports.

🎯 Intended Use / Application Areas

✔️ flower pot decoration
✔️ indoor plant decor
✔️ outdoor garden & balcony decor
✔️ decorative planter accessories
✔️ windowsill decoration
✔️ home & garden gifts
✔️ playful plant decoration

Animal Flower Pot Decor Set – 4 Decorative Pot Figures (Ø 80 mm)

This animal flower pot decor set transforms simple flower pots into charming decorative objects with character. The figures are placed in front of the flower pot, visually integrating the pot into the animal design. The plant remains fully usable – the figure acts as a decorative shell and eye-catcher.

The set includes four animal figures (turtle, bunny, hedgehog, and owl), designed with a calm, modern style. This makes them suitable for both minimalist interior decor and playful plant arrangements. The standard pot diameter is 80 mm, but it can be easily adjusted to other sizes using Bambu Studio.

areas of use / application

These flower pot figures are versatile and ideal for:

• living spaces: living room, bedroom, hallway, shelves, sideboards
• windowsills: perfect for small plants, succulents, or decorative greenery
• kitchen: herb pots (basil, mint, thyme, rosemary)
• children’s rooms: friendly, calm animal shapes without sharp edges
• office & workspace: small green accents for a more pleasant atmosphere
• balcony & covered outdoor areas: with suitable materials (PETG / ASA)
• gift ideas: a printed pot combined with a plant makes a personal, lasting gift

The figures are not seasonal and can be used all year round.

Figure Descriptions 

turtle

The turtle represents calmness, stability, and balance. Its rounded, harmonious shape blends perfectly with natural plant arrangements. It feels peaceful and high-quality, making it ideal for living spaces, offices, or herb pots.

bunny

The bunny adds a friendly, gentle touch to your decor. It works beautifully in bright interiors, children’s rooms, or as a spring-inspired accent, while remaining suitable year-round thanks to its clean design.

hedgehog

The hedgehog stands out with its textured surface, which looks lively even without painting. It looks especially good in earth tones, stone colors, or matte brown. Perfect for herbs, autumn plants, and natural materials.

owl

The owl feels like a small guardian for your plant. Its clear shape makes it a real eye-catcher on shelves or windowsills. Dark colors appear elegant, while light colors look modern and calm.

Highlights

• 4 animal designs in one set: turtle, bunny, hedgehog, owl
• compatible with many pot sizes: easy scaling via slicer
• friendly, timeless design: fits modern and classic interiors
• great even without painting: excellent appearance with single-color filament
• ideal for gifts & home decor

step-by-step guide (Bambu Studio – measuring & scaling)

1) measure the pot correctly

1. place the pot on a flat surface
2. measure the outer diameter at the top rim
3. for oval pots, measure twice and use the larger value

2) load the model

1. open Bambu Studio
2. import the desired figure
3. make sure the model is correctly positioned on the build plate

3) use the “measure” function (slicer check)

1. select the “measure” tool
2. click two opposite points on the upper holding area of the figure
3. note the displayed value (reference size of the model)

this step ensures that scaling is applied precisely to the relevant area.

4) scale the model

1. select the figure
2. click “scale”
3. enable uniform scaling
4. enter the calculated percentage value
5. confirm

5) test fit (recommended)

• optionally perform a test print
• place the figure on the pot
• fine-tune if necessary (+/– 1–3 %)

🖨️ Printing Recommendations (Cubisten Lab Setup)

• Orientation: as provided
• Layer height: 0.16 – 0.20 mm
• Infill: 10–15%
• Materials:
  • PLA / PLA+ → indoor use
  • PETG → outdoor & garden use recommended
• Supports:
  • required
  • tree / organic supports recommended
• Post-processing:
  • careful support removal
  • optional light sanding

🧩 Technical Description

⚠️ IMPORTANT – Support Requirement

Supports are mandatory for all models.
Due to overhangs and decorative details, printing without supports may result in failed prints or damaged elements.

Support Removal Notice

• remove supports slowly and carefully
• wait until the print has fully cooled
• use small pliers or flush cutters
• avoid twisting the decorative elements

This is a decorative model, not a fast print.

our setup (tested print environment)

All figures were practically tested and printed with the following setup:

• printers:
  • Bambu Lab X1 Carbon
  • Bambu Lab P1S
• software:
  • Bambu Studio (current version at time of testing)
• materials:
  • PLA
  • PLA+
• nozzle diameter: 0.4 mm
• build plates: textured PEI & smooth PEI
• tests performed:
  • various pot rim shapes (straight, slightly conical, rounded)
  • multiple scalings (below and above 80 mm)

result:
With PLA and PLA+, there were no issues with fit, stability, or functionality. The figures sit cleanly on the pot rim and can be easily placed and removed.

🧩 Cubisten Lab Setup (Included – Important)

This model set was designed, tested, and prepared using the Cubisten Lab setup, with a focus on:

• decorative fit on common flower pots
• stable geometry after scaling
• predictable support behavior
• reliable printing on Bambu Lab printers
• clean visual appearance for home & garden use

For best results, we recommend printing the models exactly as prepared using the Cubisten Lab setup.

⭐ Key Highlights

• 4 animal flower pot decor figures
• suitable for home & garden use
• scalable diameter for different pot sizes
• optimized 85 mm design size
• supports mandatory – clearly documented
• tested with Cubisten Lab setup
• exclusive Cubisten Lab design

FAQ

do the figures fit all pots?
Yes, as long as the top rim is measured correctly and the model is scaled accordingly.

why measure and scale?
Measuring ensures you reference the correct area in the slicer, significantly improving fit accuracy.

which material is best?
For indoor use, clearly PLA or PLA+. For outdoor use, PETG or ASA.

is a test print recommended?
Yes, especially for unusual pot shapes.

Conclusion

This animal flower pot decor set is a simple yet highly effective way to showcase plants individually. Thanks to the clear step-by-step scaling process in Bambu Studio, each figure can be precisely adapted to almost any pot. The four animal designs cover different styles – from calm and natural to playful and decorative.
Whether as home decor, an office accent, or a gift, these figures are durable, flexible in use, and turn any flower pot into a small design statement.