andy_druckt_3d

cover

IMG_6991.jpeg

IMG_6992.jpeg

IMG_6994.jpeg

plate_1.png

<h2>Empfohlene Druckeinstellungen (FDM)</h2>Material: PLA / PLA+ Layerhöhe:<ul><li>Standard: 0,2 mm&nbsp;</li></ul>Infill: 12–15 % Wandlinien: 3 Top/Bottom: 5 Supports:<ul><li>Notwendig</li><li>Optional: Tree Supports – nur vom Druckbett, falls dein Drucker Probleme mit dem Rand des Hasen hat</li></ul>Brim: 5–8 mm empfohlen Ausrichtung: Wie hochgeladen (stehend)<h2>Skalierung</h2><ul><li>Standardgröße: optimal</li><li>Empfohlen: 100–120 %, größer aber auch möglich</li><li>Nicht empfohlen: unter 80 % (Nest verliert Details)</li></ul>

<h2>Recommended Print Settings (FDM)</h2>Material: PLA / PLA+ Layer height:<ul><li>Standard: 0.2 mm&nbsp;</li></ul>Infill: 12–15 % Wall lines: 3 Top/Bottom: 5 Supports:<ul><li>Required</li><li>Optional: Tree Supports – from print bed only, if your printer has problems with the bunny's edge</li></ul>Brim: 5–8 mm recommended Orientation: As uploaded (standing)<h2>Scaling</h2><ul><li>Standard size: optimal</li><li>Recommended: 100–120%, larger but also possible</li><li>Not recommended: below 80% (nest loses details)</li></ul>

0.2mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Diese hochdetaillierte Osterfigur zeigt einen niedlichen Hasen, der sich über den Rand einer aufgebrochenen Eierschale lehnt. Im Inneren befindet sich ein Nest mit mehreren Eiern, verziert mit feinen Texturen.Das Modell eignet sich perfekt als:<ul><li>Osterdekoration </li><li>Geschenk zu Ostern </li><li>Tisch- oder Fensterdeko</li><li>Sammlerfigur</li></ul>

This highly detailed Easter figure shows a cute bunny leaning over the edge of a broken eggshell. Inside is a nest with several eggs, adorned with fine textures.The model is perfect as:<ul><li>Easter decoration </li><li>Easter gift </li><li>Table or window decoration</li><li>Collector's figure</li></ul>

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models

Easter Bunny with Eggshell, Flowers & Nest Easter Decoration

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models