Slippery Egg Fidget

On a fidget fun scale of 0-10, this Slippery Egg Fidget might just be a 10 🤩  It's super smooth and satisfying.  Hard to put down but also sometimes hard to hold on to 🥚😂

Dimensions of Slippery Egg Fidget: approx. 3 in. x 2 ½ in.

This is my original design (not revised) inspired by the Twisty Ball Fidget by Coffey Manufactury. I thought an egg shaped version would be fun for Easter 🥚 

Check out his model here 👉 https://bit.ly/3M4e2Sc

• Basic PLA works great (you can also use PLA Silk or PLA Matte but I recommend you reduce the outer wall speed to 50mm/s & inner wall speed to 100mm/s)
• 0.20mm Layer Height
• Infill 0%
• No Supports

I have including the following 3mf Project File:

Print Plate #1 Slippery Egg Fidget (settings for Basic PLA): one color, Arachne wall generator selected, 0% Infill 

Print Plate #2 Slippery Egg Fidget (settings for Silk PLA or Matte PLA): one color, Arachne wall generator selected, 0% Infill, Out Wall Speed 50 mm/s & Inner Wall Speed 100 mm/s

Please note: The Slippery Egg Fidget on Print Plate #1 and #2 are the same - but plate #1 has settings for printing the Egg in Basic PLA and plate #2 has settings set for printing the Egg in Silk PLA or Matte PLA. 

I slowed down the wall speeds for the Silk and Matte PLA’s for a smoother finish and better articulation/movement:)

Also, ensure your print plates are clean and your filament dry for the best adhesion and print quality. You can also use a little glue on the printbed for added grip 💪

My designs are free for personal and non-commercial use. I offer a commercial license on Thangs. Here is a link if you'd like to check it out 👉 https://thangs.com/designer/3DPmom

If you like my work and want to help support it, you can buy me a Diet Coke at https://www.buymeacoffee.com/3dpmom Thanks so much!

Have fun printing!! Erin