Catan Cities & Knight Box + English Version
Print Profile(5)
Bill of Materials
Description
Make sure to check which version of Catan you own before printing! This is for the EU wooden version!
A custom made model for the the Expension Cities and Knight for Catan.
Latch need to be printed 2 times
Walls and Knights need to be printed 4 times
Box for the pieces need to be printed 4 times
Metropole needs to be printed 3 times (Original will fit as well)
Pirate also include because the original does not fit
(I printed the pirate and metropole with 100% infill for some weight recommended!! Trust me :) )
The “Catan C&K Box Bin Support Layer” is a layer between the bottom of the box and the bins. So they rest on it. This can be placed loose on top of the bottom layer (see pictures)
The “Catan C&K Box Main Inlay” needs support on the little corners. just the tiniest bit.
Mine printed not as a hole but a foldable form so you can fit it better in the box and glue it later
Hardware You need
8mm x 2mm magnets (8x)
30mm M3 Bolts (6x)
Boost Me (for free)
I put a lot of time and effort into my models to give you the best 3D printing experience possible. I try to make as many variations as possible so that everyone can find the right one for them and save you time! ;) Thank you very much for all the likes, downloads and BOOSTS! Have a good print!
If you really like my model and want to support me:
This remix is based on
License
Comment & Rating (9)