Locker switch plate: 2012-2018 Jeep JK/JKU Rubicon

Switch plate for Jeep JK and JKU Rubicon models. Allows the use of lockers in 2wd, 4wd high, or 4wd low. Also allows front and rear to be used independently.

Dremel out the “Off-Road” portion of the bracket and glue this one down. Uses RE1 Series switches. Example: RE11131023-116 switches available on Digikey or other suppliers.

I use the green switch to activate the two locker switches (used as a safety against accidental locker activation). One switch activates the rear locker, the other activates the front locker. Look for the JK Locker Override videos on YouTube to figure out how to wire them. It supplies ground to the purple wires coming from the locker actuators on the passenger side.