HEROME STRANGER THINGS MAX

Max as a 3D Printed action figure is at the center of a round “Upside Down” diorama: a large circular base with twisted roots/tentacles, rocks, and small details like eerie mushrooms. She is suspended above the central trunk, in a trance, looking upwards, with visible on-ear headphones, a light blue jacket, jeans, and red shoes. It's a display piece, super scenic… but the levitation needs to be resolved with a hidden support or an attachment to a root, otherwise it ends up in “free fall” mode.

If you want to collect them all… come here (the trap is already set)

https://makerworld.com/en/@Gara/upload

Technical Notes (the truth, not poetry)

• I prefer to print them single-color, then primer and color with acrylic markers (fast, controllable, satisfying).
• The colored images are examples: then the actual coloring is a matter of personal taste, and that's the beauty of it.
• This design originated from an AI generation (Tripo) which I manually refined and FDM tested to ensure printability and quality.
• The “real” photos are the single-color ones (white).
• When removing supports: tweezers, calm, delicacy (no need to go Rambo on the supports: you'll just cry and blame the filament).

As always (the part that decides whether you print or curse)

There's only one key: bed adhesion.
I use CryoGrip Pro Frostbite and the adhesion is so good that prints seem to have a mortgage on the bed: they never let go.
I mainly use Bambu filaments and have no problems.

If you have a different setup:

• first think about adhesion (first and foremost)
• dry and quality filament
• do things cleanly and you'll see that “mysteriously” everything works much better

Closing (honest collector's version)

VIETPANDA is not “a panda with a big weapon”.
It is the pillar of the Wave: the one that makes others say “ok, now we look like a team” when it's on display.

And yes: your brain will tell you “I'll only print one”…
…while your display cabinet is already making space.