Print Profile(1)
Description
Description
I printed it 10 cm for testing the supports are very delicate but if removed with extreme care and tweezers they come off without leaving damage but must be removed one by one slowly
PLA Basic white
0.08 extra fine
hybrid tree
only 10mm outer brim
object space 0mm
If you want to collect them all… come here (the trap is already set)
https://makerworld.com/en/@Gara/upload
Technical notes (the truth, not poetry)
I prefer to print them single color and paint them after priming using acrylic markers
The colored images serve as examples for coloring but then it's very much up to personal taste
This design originated from an AI generation (Tripo) which I manually refined and tested on FDM prints to ensure printability and quality
The "real" photos are the single-color ones (white)
When detaching the supports: tweezers, calm, delicacy (no need to go Rambo on the support you'll cry later)
As always (the part that decides if you print or swear)
There is only one key: bed adhesion
I use CryoGrip Pro Frostbite and the adhesion is so good that the prints seem to have a mortgage on the bed they never let go
I mainly use Bambu filaments and have no problems
If you have a different setup
focus on adhesion (first of all)
use dry and quality filament
do things cleanly and you will see that "mysteriously" everything works much better
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (21)