Search models, users, collections, and posts
Glass bed corner clamp
Remixed by
IP Report
Print Profile(1)
0.12mm layer, 2 walls, 20% infill
Designer
1.2 h
1 plate
Open in Bambu Studio
Boost
18
47
3
3
160
45
Released
Description
This model was designed for Ender 5 Pro but it should be working with glass beds lower than 8mm.
Printing:
no supports, >20% infill, PETG, no brim, 0.15 height
Material is key, I wouldn't recommend PLA, ABS and PETG will be best.
---
Updates:
- July 14, 2023: Printing with those clamps for a month now and I have no issues. I am mainly printing with PLA but did a couple of PETG prints as well and I see no deformations.
- August 5, 2023: Printing with PLA almost daily, still no deformations. Sometimes when I scrape the bed the clamps fly away because I do not over tighten them. Solution is to hold the opponent end of the bed when scraping. I might rework the screw because the grip can be improved.
- August 5, 2023: Included a tightening screw with better grip, yet to be tested.
Please leave a like if you find the model useful. Would love some feedback and see your prints as well.
If you have some concerns or you want some custom modification to fit your printer don't hesitate to leave a comment.
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (3)