Vecna - Stranger Things Season 5

Vecna Fanart - Full Body Detailed Figure (Stranger Things Season 5)

Bring the horror of the Upside Down to your shelf. This is a highly detailed, full-body model of Vecna, inspired by his terrifying appearance in Stranger Things (Season 5).

Enjoy my work? Support me or get a commercial license on Patreon!

⚠️ Important Printing Tips – Please Read!
This model features intricate details and thin limbs, making it a delicate print. I have spent time tuning the print profile to ensure success.

There are two preset sizes included: Standard and A1 Mini.
You can also scale the model to any size you want in your slicer.

🦶 Standing Stability:
This model is designed to stand on its own, but due to the battle damage visible on the sculpt, one leg isn’t in perfect condition, which can slightly affect stability depending on your printer, filament, and settings.
If you want to be extra safe, I recommend adding a simple base under the feet, you can easily do this directly in your slicer by placing a 1–2 mm thick primitive (like a cylinder or rectangle) underneath, or you can use your own base / stand anything you prefer.

🐢 Speed & Stability:
Due to the model's height and thin parts, I have added modifiers to significantly slow down the print speed at critical heights. This prevents the model from wobbling and ensures high quality on the finer details. Please do not remove these modifiers unless you are very experienced.

🧱 Material:
I have successfully tested this model with multiple types of PLA, including basic PLA and wood PLA.
I’ve printed it several times using wood PLA, and even though it can be more brittle and sometimes has weaker layer adhesion, the prints came out clean and error-free.

Support removal also went smoothly, and it usually takes under 10 minutes if you’re careful.