Modded Card Storage Bin

This is a remix of the MTG Card Storage Bin - Short Slide-Out Organizer (the non-sleeved version) originally designed and posted by Ficking Games. Please note that the stack lock slider piece is not included in this remix model; you will need to print it from Ficking Game's OG profile. 

Edits in this Remix:

• To dramatically reduce filament changes (less than 10 vs. 300+ on the OG model), I modded the card box so that the images/symbols print separately on circular disks. They then snap onto the main card box, no glue needed. A blank disk is also included; Lars Becker has a great tutorial about how to add your own symbol/image here. 
  • The disks are designed to be a bit thicker than the drawer front. If you want it more “flush” to the front, use the cut tool in BambuStudio to cut off .5mm from the front of the disk (not the pegs on the back of the disk). 
• For the tower/box holder, I filled in some of the side squares so that it printed a bit faster.  Note that the model still includes Ficking Game's logo on the inside. 

A note about printing: For the tower/box holder, dry filament is your friend. It will help make sure the disk peg holes print cleanly. If the top of the hole(s) print a bit droopy, use a deburring tool or a small screwdriver to file away the drippy edges just enough to fit the disk pegs.