P2S Riser with Official Exhaust Solution

Function Description: The P2S riser is paired with the official exhaust kit, providing automatic exhaust without manual intervention. Its design integrates seamlessly with the P2S shell, appearing unobtrusive, and features a black (corner) + grey color scheme for a more appealing look.

Revision History:

V1.1 Added rear exhaust grille to disperse air pressure distribution

V1.2 Reduced actual connection contact area to facilitate part sanding and trimming, counteracting assembly difficulties caused by part shrinkage tolerances

V1.3 Removed screw fixing (screw fixing found redundant after actual structural trial assembly)

V1.4 Optimized part structure to reduce warping risk

V1.5 Rear exhaust duct diameter adjusted from 100mm to 80mm, outdoor side 100mm

V1.6 Removed light strip

V2.0 Removed side vents (actual testing showed only the rear vent was effective, air pressure was insufficient to support side vents). Only the front vent remains, which typically does not need to be opened during printing.

accessories list:

This solution may require a list of externally purchased parts. The following is for reference only and no recommendations are made:

1. Official Exhaust Kit Quantity: 1 Unit Price: 99 Location: Fan Kit

2. Knurled Brass Nut Quantity: 10 Unit Price: 0.06 Location: Fan Kit (6 pcs) / External Exhaust Duct Fixing (4 pcs)

3. Countersunk Screw M3*50mm Quantity: 4 Location: Fan Kit

Countersunk Screw M3*30mm Quantity: 6 Location: Fan Kit (2 pcs) / External Exhaust Duct Fixing (4 pcs)

4. Sealing Strip Quantity: 1 meter Unit Price: 0.4 Location: Fan Kit / External Exhaust Duct Fixing

5. Round Magnet (diameter 5mm*thickness 3mm) Quantity: 16 Unit Price: 0.2 Location: Front Vent Cover

6. Optional: Window and Door Baffle, suitable for sliding windows, with free drilling, fixed with window and door stops

7. Others: Exhaust Duct diameter 80mm (1 pc) / 100mm (1 pc), length selected according to needs

Assembly Instructions: To be updated