Print Profile(1)
Description
Required materials:
- Original Apple Magsafe Charger
- Apple watch charger (old plastic gen or new metal), old plastic gen is 7.9mm tall, new metal gen is 6.4mm
- Double stick tape (recommended)
NOTE:
You will need to print the 1.5mm spacer if you have the thinner apple watch charger, otherwise the charger will be sunken 1.5mm
Printing:
I did 0.12mm layer height, you may get some under extrusion here if your printer is not tuned well or are using low-quality filament, to play it safe you can do 0.2mm
iPhone compatibility:
For the phones with a large camera, my iPhone 16 Pro was fine, even with a Mous case on, the bump did not get in the way of the positioning of the Magsafe.
Double stick tape:
Use this as the model is only 45g, and the magnetic force is much stronger when taking off the phone. Tape to table.
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)