Model 4 – Industrial Sewing Machine Presser Foot, EP Presser Foot Small Storage Rack [2.0]

[20260723 Update Log] - Presser Foot Storage Rack (3*7 size) [Version 2.0].

1. The structure of the presser foot storage rack [Version 2.0] is more robust than [Version 1.0], and presser feet are smoother to retrieve.

2. Optimized printing parameters and support settings, shortening printing time.

3. Changed the original 3*6 specification to 3*7, increasing storage space.

————————————

Model Introduction

A small storage rack for ep presser feet and other industrial sewing machine presser feet,

The design combining card slots and baffles means you don't have to rummage through drawers for presser feet, and it fits perfectly in the corner next to the sewing machine.

[For storage tools for household machine presser feet, please move to "Model 16 - Household Sewing Machine Modular Storage Rack"]

————————————

!!!!! Printing Notes !!!!!

[Do not print with PLA, it is recommended to use PETG and more flexible filaments!]

· Before printing, please perform filament pre-processing, including but not limited to: filament drying, flow rate calibration, sinkage rate calibration, etc.

· Also, as the printing time is long, it is recommended to thoroughly clean the build plate and evenly apply printer glue.

· If you are a beginner, do not change the printing direction and printing parameter settings yourself; you need to debug printing temperatures, etc., according to the characteristics of the filament.

· If a roll of filament fails to print, it is recommended to try different PETG filaments, as the printing quality of this model is highly dependent on the quality of the PETG filament itself.