Print Profile(1)
Description
I printed it 10 cm for a test; the supports are very delicate, but with extreme care and tweezers, they can be removed without leaving damage, but they need to be removed one by one slowly.
PLA Basic white
0.16 extra fine
hybrid tree
only 10mm outer brim
object spacing 0mm
If you want to collect them all… come here (the trap is ready)
https://makerworld.com/en/@Gara/upload
Technical notes (the truth, not the poetry)
I prefer to print them in a single color and paint them after priming, using acrylic markers.
The colored images serve as examples for coloring, but personal taste plays a big role.
This design originated from an AI generation (Tripo) that I manually refined and tested on FDM prints to ensure printability and quality.
The "real" photos are the single-color ones (white).
When removing supports: use tweezers, be calm, and gentle (no need to go Rambo on the support, or you'll regret it).
As always (the part that decides if you print or curse)
There is only one key: bed adhesion.
I use CryoGrip Pro Frostbite, and the adhesion is so good that the prints seem to have a mortgage on the bed: they never let go.
I primarily use Bambu filaments and have no issues.
If you have a different setup:
focus on adhesion (first and foremost)
use dry, quality filament
do things cleanly and you'll see that everything 'mysteriously' works much better
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)