rubber band, arrow stabilizer model,
Print Profile(1)
Description
1. 284mm aluminum profile, standard 20mm specification, used by most 3D printers.
2. Machine bolts and nuts. Prepare some extra, as bolts often get damaged.
- 4 M3_30mm bolts
- 20 M3_20mm bolts
- 4 M3_15mm bolts
- 4 M3_25mm bolts
- 40 M3 nuts
- 1 M4_40mm bolt
3. 1 M4 nut
4. M5x100mm screw (optional) and M5 bolt for main lever reinforcement
5. 4 compression springs and 1 tension spring with an 8mm radius
6. Hand arrows
7. Rubber, such as from bicycle tires, can be cut into 8mm wide strips, or any soft material can be used
8. A 20mm long steel wire
Boost Me (for free)
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)