Mighty_Nug

cover

IMG_7362.jpeg

IMG_7363.jpeg

IMG_7364.jpeg

IMG_7365.jpeg

IMG_7366.jpeg

IMG_7388.jpeg

IMG_7390.jpeg

plate_1.png

e8256e757db4e459.png

<h2>PRINT PROFILE</h2><h3>Recommended Material</h3><ul><li><strong>PETG</strong> (preferred)</li><li><strong>PLA+</strong> acceptable for indoor use</li></ul><p>PETG is recommended due to heat resistance and impact strength for heavier tools.</p><h3>Layer Height</h3><ul><li><strong>0.20 mm</strong> (balanced strength and speed)</li><li>Optional: 0.28 mm for faster prints</li></ul><h3>Nozzle</h3><ul><li><strong>0.4 mm</strong> standard</li></ul><h3>Infill</h3><ul><li><strong>25–30% Gyroid</strong></li><li>Cubic or Grid also fine</li></ul><p>This provides good load support without wasting material.</p><h3>Perimeters / Walls</h3><ul><li><strong>4 walls minimum</strong></li><li>Top/Bottom: <strong>5 layers</strong></li></ul><h3>Supports</h3><ul><li><strong>Strong Tree</strong></li><li>On plate</li></ul><p>Prints flat as designed.</p><h3>Orientation</h3><ul><li><strong>Print flat on the build plate</strong></li><li>No rotation required</li></ul><h3>Estimated Print Time</h3><ul><li>~2 hours (0.4 mm nozzle, 0.24 layer)</li></ul><h3>Notes</h3><ul><li>Designed for garage and shop storage</li><li>Test fit before long-term loading</li><li>Not intended for outdoor exposure unless using PETG or ASA</li></ul>

0.2mm layer, 6 walls, 25% infill

<p>This hook is designed to securely hold the <strong>EGO 765 leaf blower</strong> on standard <strong>Gorilla Rack shelving</strong>. It clips onto the shelf edge and supports the blower by the handle, keeping it off the floor and easy to access.</p><p>The design installs without hardware and stays firmly in place once mounted.</p><ul><li>EGO 765 Leaf Blower</li><li>Gorilla Rack shelving</li><li>IKEA utility cart (same shelf profile)</li></ul><p>*Note would not hang this with a battery installed.  Check my other models for the battery hook.</p>

Gorilla Rack EGO 765 Leaf Blower Hook

ASIA

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models