INSEKT box knife
Print Profile(1)
Bill of Materials
Description
INSEKT knife
NO NEED FOR AN AMS - PRINTS WITHOUT SUPPORTS.
box cutter / utility knife using those disposable blades you can find at any hardware store.
Safety guard / sleeve included.
Uses 2 - M3X10mm and 1 - M3X8mm bolts with 3 - M3 nuts.
There’s 4 plates - 3 to print in separate colours and a 4th plate to print the whole knife in one shot as a single colour.
I suggest using a 20% infill, 5 base and top layers with 3 walls for strength. Mine are printed in PLA and is easily strong enough for most applications.
As with anything using sharp blades, safety is paramount. Please take utmost care when using any printed knife.
You print and use the design at your own risk. I accept zero responsibility for any harm or damage caused through printing this file.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)