A1 AMS Lite Hanger
Print Profile(1)
Description
Below is the video description:
Below is the text description:
This bracket is used for inverted installation of AMS lite, using PVC 40 pipes to build the main frame. One of two types of brackets needs to be printed. The file contains two brackets with different orientations; the bracket on plate 1 is more versatile. If you can't decide, choose the bracket on plate 1 in the 3mf file.
In addition to the print files, the following parts are required:
1. 40 PVC pipes, horizontal bars: 50cm * 2; vertical bars: 90cm * 2; desktop supports: approx. 40cm * 2, total 3.6m. 2x 90° elbows; 2x 4-way connectors.
2. 4-pin extension cable, Taobao ≤ 10 yuan/piece
Bracket advantages: stable, low cost; inverted installation is more conducive to filament feeding, avoiding excessive friction caused by bent PTFE tubes.
Installation: Unscrew the 4 screws of the original bracket and replace them with the printed parts. Install the PVC according to the diagram.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)