Search models, users, collections, and posts
Horse kit card
IP Report
GIF
Print Profile(4)
X1C/A1/P1S
Designer
2.9 h
3 plates
One printing plate, 1h47m fast print, neck problem solved
1.9 h
1 plate
Pieces Only - 0.2mm layer, 2 walls, 15% infill
2.2 h
3 plates
0.2mm layer, 2 walls, 15% infill
1.9 h
1 plate
Open in Bambu Studio
Boost
1143
3191
168
56
2 k
1 k
Released
Description
Attention!
The tolerances are specially tight to ensure that the model is stable and does not lose pieces. Make sure you have calibrated filaments and do not overextrude.Look at the instructions carefully and make sure you have a good grip on the plate.The model is designed to be printed in pla.
Today I present to you a model initially created for laser cutting on plywood.
I wanted to propose it completely 3D printable with also simplified assembly instructions.
Have fun assembling it with your children.
A pastime to do with the familyHappy Printing.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (168)