Glass Door Side Panel Gap Cover for P2S
Print Profile(1)
Bill of Materials
- 1.1x10mm VHB tape for mounting x 1:
Description
Boost Me (for free)
If you like this, please consider boosting!
Based off the ideas of br1acc, I've made this model from scratch to fit the P2S, as the doors and measurements are quite different.
Helps keep chamber temps a little warmer and slightly reduce fumes and fan noise.
Total print time of 1 hour 37 minutes.
This seal does not replace the original seal on the hinge-side of the door, but it merely adds to it.
Align the parts (top has a lip that goes up, bottom does not) with the outside (left side) of the existing silicone seal that is factory-standard on the door.
Use 1.1x10mm VHB tape to secure the seal parts to the inside of the glass door, after having aligned them to themselves with the on-part dovetail.
The seal does not create a 100% perfect seal on the door, but it works.
While there are gaps by the hinges, the space between the printer and the hinge receives a slightly better seal when the door is closed.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)