Keebasg

cover

20260124_183553.jpg

20260124_183643.jpg

20260124_183647.jpg

plate_1.png

0069dea5e97de7e0.png

0.2mm layer, 2 walls, 15% infill

l8nighter

20260327_193154.jpg

<p>My ESP32 was a big longer so I had to scale everything to 105%</p>

Both parts on a single plate

<p>Voici un <strong>boîtier imprimable en 3D</strong> conçu pour accueillir un <strong>ESP32 Dev Kit</strong> avec un <strong>lecteur RFID RC522</strong>.</p><p>Ce boîtier est idéal pour les projets <strong>ESPHome + Home Assistant</strong>, comme :</p><ul><li>contrôle d’accès NFC</li><li>déclenchement d’automatisations</li><li>projets domotiques DIY</li></ul><h3>✨ Caractéristiques</h3><ul><li>Compatible <strong>ESP32 Dev Kit</strong></li><li>Compatible <strong>RC522 RFID</strong></li><li>Design compact et propre</li><li>Accès facile au port USB</li><li>Parfait pour montage mural ou posé</li></ul><h3>🧩 Utilisation typique</h3><ul><li>RFID pour Home Assistant</li><li>Système de badge</li><li>Projets ESPHome / domotique</li><li>Prototypage rapide</li></ul><h3>🖨️ Impression 3D</h3><ul><li>Impression sans supports <i>(si c’est le cas, dis-le moi)</i></li><li>PLA recommandé</li><li><p>Orientation simple pour une impression propre<br> </p><figure class="table"><table><thead><tr><th>RC522 Pin</th><th>ESP32 Pin</th><th>GPIO</th></tr></thead><tbody><tr><td><strong>SDA / SS</strong></td><td>CS</td><td><strong>GPIO 5</strong></td></tr><tr><td><strong>SCK</strong></td><td>SCK</td><td><strong>GPIO 18</strong></td></tr><tr><td><strong>MOSI</strong></td><td>MOSI</td><td><strong>GPIO 23</strong></td></tr><tr><td><strong>MISO</strong></td><td>MISO</td><td><strong>GPIO 19</strong></td></tr><tr><td><strong>RST</strong></td><td>RST</td><td><strong>GPIO 22</strong></td></tr><tr><td><strong>3.3V</strong></td><td>3V3</td><td><strong>3.3V only</strong></td></tr><tr><td><strong>GND</strong></td><td>GND</td><td>GND</td></tr><tr><td>IRQ</td><td>—</td><td><i>Not used</i></td></tr></tbody></table></figure></li></ul>

<p>Here is a <strong>3D printable case</strong> designed to house an <strong>ESP32 Dev Kit</strong> with an <strong>RC522 RFID reader</strong></p><p>This case is ideal for <strong>ESPHome + Home Assistant</strong> projects, such as</p><ul><li>NFC access control</li><li>automation triggers</li><li>DIY home automation projects</li></ul><h3>✨ Features</h3><ul><li>Compatible <strong>ESP32 Dev Kit</strong></li><li>Compatible <strong>RC522 RFID</strong></li><li>Compact and clean design</li><li>Easy USB port access</li><li>Perfect for wall mounting or tabletop use</li></ul><h3>🧩 Typical usage</h3><ul><li>RFID for Home Assistant</li><li>Badge system</li><li>ESPHome / home automation projects</li><li>Rapid prototyping</li></ul><h3>🖨️ 3D Printing</h3><ul><li>no supports <i>(if so, let me know)</i></li><li>PLA recommended</li><li><p>Simple orientation for a clean print<br> </p><figure class="table"><table><thead><tr><th>RC522 Pin</th><th>ESP32 Pin</th><th>GPIO</th></tr></thead><tbody><tr><td><strong>SDA / SS</strong></td><td>CS</td><td><strong>GPIO 5</strong></td></tr><tr><td><strong>SCK</strong></td><td>SCK</td><td><strong>GPIO 18</strong></td></tr><tr><td><strong>MOSI</strong></td><td>MOSI</td><td><strong>GPIO 23</strong></td></tr><tr><td><strong>MISO</strong></td><td>MISO</td><td><strong>GPIO 19</strong></td></tr><tr><td><strong>RST</strong></td><td>RST</td><td><strong>GPIO 22</strong></td></tr><tr><td><strong>3.3V</strong></td><td>3V3</td><td><strong>3.3V only</strong></td></tr><tr><td><strong>GND</strong></td><td>GND</td><td>GND</td></tr><tr><td>IRQ</td><td>—</td><td><i>Not used</i></td></tr></tbody></table></figure></li></ul>

ESP32 + RC522 NFC – (ESPHome / Home Assistant)

ASIA

RC522 Pin	ESP32 Pin	GPIO
SDA / SS	CS	GPIO 5
SCK	SCK	GPIO 18
MOSI	MOSI	GPIO 23
MISO	MISO	GPIO 19
RST	RST	GPIO 22
3.3V	3V3	3.3V only
GND	GND	GND
IRQ	—	Not used

Print Profile(2)

Bill of Materials

Description

✨ Features

🧩 Typical usage

🖨️ 3D Printing

Comment & Rating (3)

License

Related Models