Lord of the rings Litophane Lightbox

Lord of the rings Litophane created and printed by me.

Box created by me from scratch.

Lithophane made with lithophanemaker.com

As a backlight, I used a 50 cm long USB-powered LED strip attached with 3m tape.

https://www.youtube.com/watch?v=YpA4UsfZDlo

The upper part of the frame requires supports.
Wait until the print cools down so that it does not deform when removed from the plate. Otherwise, there may be problems with fitting.

The upper part of the frame requires supports.
Wait until the print cools down so that it does not deform when removed from the plate. Otherwise, there may be problems with fitting.

On layer 51, on the top of the frame, change the color of the filament for a better visual effect.
In my case, I used Jayo brown filament and iBoss golden silk.