8mm Collet Install Adapter for Carvera / Air /Z1

This is an adapter designed for installing the 8 mm collet “DGZ-60E 8mm,” which is compatible with the Makera CNC series.
A separate 10 mm socket is required.

Filament type, color, and thermal shrinkage may cause slight dimensional variations in the printed part.
If necessary, I recommend adjusting the original STEP file to match your specific 10 mm socket.

The default settings are intended for printing with a 0.2 mm nozzle.

If the knurling detail is not important for your use case, you can switch to a 0.4 mm nozzle for easier printing.