Wobblz - The weighted pill shaped Character

The Wobblz is a sleek, pill-shaped character designed to be poked, pushed, and knocked over—only to pop right back up every time. This self-righting behavior provides a satisfying desk toy experience that is as simple as it is addictive. Check out my profile for other fun character designs! 

This First Wobblz Name is The O.G.

Spin it, Flick it, Roll it, and watch in delight as it tumbles back upright!

                                    Click here!: https://makerworld.com/en/collections/20148284-wobblz

I wanted to create a fidget toy with a different type of play feature from the common articulating toys, taking inspiration from classic wobbling toys to bring that same nostalgic, self-righting motion to the 3D printing community. They Wobble instead of Wiggle!

Key Features & Printability

• Self-Righting Action: An internal cavity with steel washers shifts the center of gravity, ensuring the model always returns to an upright position.
• No Supports Needed: Optimized geometry for a clean, support-free print directly off the build plate.
• Smooth Finish: Designed for a clean look that feels great in the hand and looks sharp on any desk.
• Great at Markets!: I've sold out of stocks of these several times at farmers' markets and events. Kids love 'em 
• Hardware Required
• Glue Required

Technical Details

Size: At 100% scale, the Wobblz stands 60mm (2.36 inches) tall and is 40mm (1.57 inches) in diameter.

CRITICAL: WEIGHT AND BALANCE The self-righting mechanic relies entirely on the specific weight and center of gravity provided by the internal ballast.

• Required Weights: This model is designed specifically for a stack of five (5) 1" Steel Washers.
• Precision Counterweight: These washers must create a 27g counterweight to ensure the physics work as intended.
• Guaranteed Balance: I cannot guarantee the Wobblz will self-right properly with different brands or sizes due to weight variances.
• Community Feedback: If you experiment with other washers and find a specific brand that works perfectly, please share the details in the comments!

Assembly Instructions

1. Print Parts: Print the body, base cap, and internal core.
2. Weight the Base: Insert five (5) 1" steel washers (27g total) into the base. Note: Different washers may vary in thickness and weight, which will affect the balance.
3. Insert Core: Place the core on top of the washers, lining up the key to the slot.
4. Glue & Seal: Apply super glue to the base. Use the key for alignment to place the top body onto the base.
5. Secure: Press and hold firmly until the glue sets to lock the weights inside.
6. Wobble: Once dry, give it a shove!

Want to see this toy expanded? Ive got some great ideas in the works but would love to hear your thoughts. Should I add more characters? Get rid of the glue? add accesories? Let me know in the comments section! Your support helps me know to put more modeling time into expanding it!