Bauhaus Style Hooks for Ikea Skadis

From Frustration to Engineering: The Reinforced Skadis Hook That Won't Snap.

I originally designed this hook for my toddler’s "get ready" station. The official IKEA hooks were constantly falling off, creating a safety concern. I knew there was a better way. By utilizing popular M3 hardware and a custom T-Nut, I created a hook more secure than the Skadis board itself. In my stress tests, the board pulled off the wall before the hook failed. It is, quite literally, toddler-proof.

Instead of using an existing T-Nut design I created a new one to solve a few issues. 

• I wanted to utilize the popular M3 screws (M3 x 16mm Screw)
• The non-threaded neck allows the screw to align perfectly before the threads bite.
• By only threading the beefy base of the nut, the narrow neck stays solid, serving its primary purpose: keeping the nut perfectly aligned in the open or closed position.
• Designed to be tapped directly by your M3 screw for a rock-solid, custom fit. I found that when trying to use a nut or heat-set insert, there was not enough material to secure the hardware.

Support Me!

Features

• Dimensions: 
  • Single Hook
    • Height: 50mm
    • Hook Size: 30mm
    • Width: 19.5mm 
  • Double Hook
    • Height: 143mm
    • Hook Size: 45mm
    • Width: 19.5mm 
• Hook Self-Aligning: Self aligning pins on the back of hooks to prevent spinning and loosening.
• T-Nut Fileted Edges: 1mm fileted edges allow smooth installation and less material hanging.
• T-Nut Self-Aligning: The T-Nut self aligns when installing and remove so no back access is required.
• Popular M3 Screw: Designed for M3 screw which are the most popular on Maker World and within 3d printing. 

Specifications

• Compatibility: Ikea Skadis or clones on Maker World
• Required Hardware: M3 x 16mm Screw (1 for Single Hook, 2 for Double Hook)
• Filament Type: Tested in PLA. Should work well with anything.
• Filament Usage: 
  • Single Hook - less than 11 gram
  • Double Hook - less than 28 gram

Assembly Guide

Credits / Licensing

• Design by PixelFanLabs – With a curious mind, integrity, and your hands in the soil, you can create anything. 
• License –  All Rights Reserved
  • Personal Use Only: You may print this for your own use.
  • No Redistribution: Do not re-upload or distribute these digital files on any other platform.
  • No Derivatives: Modification of this design—including the removal of the engraved PixelFanLabs signature—is strictly prohibited.