Zenless Zone Zero Mockingbird Badge (Fridge Magnet)
Print Profile(1)
Description
Description
Printing preparations:
4 pieces of 8mm*2mm magnets
(Magnets are negative parts. The current setting is 8.1*2.1mm. You can freely change the size and quantity. Zero tolerance might not fit, so a 0.1 tolerance is fine. Glue will be needed)
(Alternatively, adjust the magnet position on the Z-axis up by about 0.5mm, then pause at the sealing layer of the negative part to insert the magnets, making them built-in magnets)
A 0.2 nozzle is used, with the first layer at 0.16mm and the remaining layers at 0.08mm
The colors used sequentially are black, bluish-purple, light gray, and white
Notes:
Printing takes a long time
Start with black, switch to bluish-purple at 3.52mm, switch to light gray at 4.16mm, switch to white at 4.56mm and wait for printing to complete
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)