Charmander Lamp/ Glumanda Lampe

🔥 Charmander Lamp with E27 Socket – 3D Printed Character Lamp

This 3D printed Charmander lamp features Charmander in a classic standing pose and is suitable as a decorative table or shelf lamp for living rooms, offices, or children's rooms. With its simple, white design, the figure subtly adapts to various interior styles and can also be painted or colored later if desired.

The model is designed for a standard E27 socket. The lamp is constructed so that the socket fits inside the figure and the cable can be neatly routed downwards. The center of gravity is stable, allowing for the use of slightly heavier LED bulbs (e.g., smart lamps).

Currently, a white version is included. A colored variant is optionally planned and may be added later.

🖨️ Print Instructions

• Recommended layer height: 0.2 mm
• Nozzle: 0.4 mm
• Material: PLA recommended (PETG also possible)
• Infill: approx. 10–15 % (Gyroid or Grid)
• Support: required depending on orientation (typically in the area of the arms / head)
• For a particularly beautiful surface, the model was tested with Fuzzy Skin (optional)

Note: Multi-color printing (if a colorful version is used later) results in significantly more waste material – estimate roughly 150% filament consumption compared to the single-color variant.

🔌 Recommended Lamp Holder (E27)

The following E27 socket was used for this model:

👉 https://www.amazon.de/dp/B0D868SDST?ref=ppx_yo2ov_dt_b_fed_asin_title

The socket fits well into the designated opening and can be secured with hot glue or superglue if necessary.

🔧 Assembly

1. Insert E27 socket
2. Route cable downwards through the opening
3. Optionally glue the socket
4. Screw in LED bulb

⚠️ Safety

This is a decorative/DIY project. Please use LED bulbs exclusively (low heat generation) and professionally assemble electrical components.