RC 1/10 Cingoli da neve 6x6 - SNOW CHAINS

With these tracks, not even snow will stop your RC model.
These spiked snow tracks are designed for 6x6 models, like my custom build you see in the photos, but can also be mounted
on individual standard wheels.

The spiked tires provide exceptional grip even on ice, and nothing will stop you.
Just be careful they don't touch the model's body.
Do not tighten the M3x30 screws, the tracks must be able to move freely.

I don't know if the tracks fit all wheels, what I can say is that I designed them for 1.9 wheels, the original ones from the Traxxas TRX4 Defender model.

The chains can be printed in PLA, but I recommend PETG (or if you prefer the more technical and difficult to print ASA or ABS) they must be durable,
I printed them in PETG HF Bambulab, but in any case, if they get damaged, you can always easily reprint and replace them.

Two print plates with 13 pcs. each, no supports needed.

These tracks are designed for low speeds and for crawlers with 1.9 wheels, there are always small differences by brand and model,
so an extra link or one less may be needed depending on the type of wheels used and, in the case of 6x6, on their distance.
For 6x6 axles, 26 track links are needed for the right side and the same for the left side.
For a single wheel, 15 track links are needed.
Each link requires one M3x30mm screw and three M2.5x8mm screws.

In total for the 6x6 (rear only), 52 M3x30mm screws and 156 M2.5x8mm screws are needed - You can find them in hardware stores, if they don't have them, order them.

Or they are available on Amazon at these links:

https://www.amazon.it/cilindrica-esagono-incassato-acciaio-guarnizione/dp/B0D14DCH5C/ref=sr_1_39?crid=2CHW5TV89AB2S&dib=eyJ2IjoiMSJ9.N-SpSYS0psVIV2Tz9wp-RaU6r3BQ8W0sPk4LPXsTx7qu72xOTbUQGF6-6pCMWQB9KwAj1AWv0GmDREcraF6odi2-iX4WVzphO7IbANTax1Q51SxEiQlmurd4sOK1ZzNML8oRbAC-O7FVRo6VjuJOOKW9XNnB84Rxl6X9cJViXnbfAKECugFasTzztj725ff8OQtLhC8ily7hr5g18eV_cFoe0Z-YhMqOwGCKGoReoRP18hnaQdcJmZ5j9P08sjBKXDXatI-81SgJZPm9_i_228feDX8Bgk-IVHtZX94mHDs.Oy-lXHBcKPPwK6AtkDuZ4a7h_tJ2oUUpcMx7f4lj2pg&dib_tag=se&keywords=viti%2Bm3x30mm&qid=1769942449&sprefix=viti%2Bm3x30%2Caps%2C297&sr=8-39&th=1

https://www.amazon.it/QUARKZMAN-Esagonale-Incassato-Carbonio-Cappuccio/dp/B0CFBDBK8F/ref=sr_1_4?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=17V05ZUW6AY78&dib=eyJ2IjoiMSJ9.U6ax-esdihAgqOLylmqQbEtoJlGwzx9xJ5AI8RpRqzdd-7KFnMNkRzwNUz0M0VVl37KGMw0h3V83m_yizpWj_4Iy4-SYl9i3Zh0irifPF4sORS1oMqBlrN_gRNwHIHMrkqXDBgeuF4c3mr6Hytjjt5n_t4ioCHrCmyLADF_hF95_7NLMEjDSduyR_rMfHTl-T09xeKEkMSNQafa3c2GldXu4R_rxDaJ5GEY5JFe5WKcbKUGluQCL542TnJWuLRlF7rYLoc_8fQAfrFMKwVKnryv4rWlOVsoHLe3riZUmf3E.MX7psu8fyTPXqomQod7gGNwKTRb1EKDG3PRa6X9OBPY&dib_tag=se&keywords=viti+m2.5x8&qid=1769942217&sprefix=viti+m2.5x8%2Caps%2C325&sr=8-4

Happy printing and have fun with your RC models.