Statue of Liberty - Breaking Bad
Print Profile(1)
Description
Lady Liberty in the lab doing some business :>
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.32mm
Use any colors you'd like, either via AMS or by manually swapping filaments as indicated below.
Filaments Used:
PLA SPARKLE BambuLab Slate Gray Sparkle Transmission Distance: 1
PLA BambuLab Matte Marine Blue Transmission Distance: 15
PLA BambuLab Matte Lemon Yellow Transmission Distance: 15
PLA BambuLab Basic Jade White Transmission Distance: 1
Swap Instructions:
Start with Slate Gray Sparkle
At layer #5 (1.12mm) swap to Marine Blue
At layer #8 (1.72mm) swap to Lemon Yellow
At layer #14 (2.92mm) swap to Jade White for the rest.
If you want to resize the print, DO NOT change the Z axis.
Happy printing, and share your make!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)