Jeep Wrangler Liftgate Hinge Cover 07-18
Print Profile(1)
Description
Replacement liftgate hinge cover for the Jeep Wrangler JK/JKU (2007–2018). I made this because I didn’t want to pay $10 for a tiny piece of plastic—and I wanted something that fits close to stock.
This is the 5th iteration of the design and has been on my Jeep for about 6 months. I’m a Fusion 360 novice, and this project took roughly 20 hours of design updates to improve strength, prevent snapping, and dial in the fit.
If this helps you, please boost the model so I can keep making and sharing functional parts.
Remixes & Community
Remixes are welcome and encouraged. Please share your builds—I’d love to see this printed in different colors and styles for added personalization.
Recommended Print Settings
- Material: PETG or ASA (preferred)
- Infill: 80%
- Wall loops/perimeters: 4
- Layer height: 0.20 mm
- Supports: Tree supports (Auto)
- Bed adhesion: optional (use brim if needed)
Installation
- Line up the round hinge section and snap it into place.
- If tight, apply a small drop of silicone spray or light oil.
- Gently press and rotate the bottom until fully seated.
- Do not force—light sanding or minor scaling may help.
Fitment Note
Fit may vary due to printer tolerances, material shrink, and hinge variations. Scaling ±0.5–1% or light sanding may be required.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)