Snapper Blaster | Water Gel Bead Blaster converted to Snapper Launcher
Print Profile(3)
Description
Boost Me (for free)
To be updated later
If you feel the launch distance is too short, you can consider replacing the spring, usually several for one or two yuan. When replacing a spring, usually the length and outer diameter remain the same, and the wire diameter increases by 0.1-0.2mm. If you don't care about the launcher's lifespan, adding 0.3mm is also an option
Before, this toy shooter of mine had a spring with a length of 70mm, an outer diameter (overall spring diameter) of 14mm, and a wire diameter (spring wire thickness) of 1.1mm. Now, keeping other specifications unchanged, just replace it with one that has a 1.4mm wire diameter
The store has been mosaiced out, anyway, they're all about the same price
--------------------------------------------------------------------------------------------------------------------------------
Original description
This small adapter can turn a QQ Kids Water Bullet Toy shooter into a pop-it cracker launcher. Because it's air-blown, it's relatively safer, and there's no need to worry about it exploding inside the tube
First, prepare a toy shooter that fires these QQ Kids Water Bullets. It's usually around 10 yuan on certain platforms, and the ones with '7-8mm universal' in the title are these. These toys fire the soft water bullets shown in the image below
Then, insert this adapter in front of the shooter, and place the pop-it cracker into this adapter
For this kind of toy-grade shooter, the inner barrel varies from 7.4mm to 7.5mm, so the end of my adapter that inserts into the shooter is intentionally made a little smaller. After printing, you just need to wrap one or two layers of clear tape around it
Due to elephant foot effect, this part might have a slightly smaller diameter, just scrape it lightly with scissors or a scraper
Two versions, long and short. I feel the longer one works a bit better
A model the same size as a pop-it cracker has been prepared. If it's inconvenient to test with real pop-it crackers, you can use this model for testing
The model is not complicated, but I tested many versions for size. If you find it useful, give it a boost~~
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)