Kärcher WD2 Plus Handle
Print Profile(1)
Description
I broke the handle of my Kärcher WD2 Plus vacuum cleaner and, after searching for a replacement, I decided to design one myself. Whether you're in the same boat with a broken handle or you just want to upgrade/tune yours with a custom-tweaked version, feel free to enjoy my model! :)
If this handle saved your Kärcher vacuum and you're happy with the result, please consider leaving a Boost or a 5-star rating. It helps me keep creating and sharing these fixes with the community! Happy printing!
Print Settings (Included in the .3mf Profile)
To ensure this handle survives heavy workshop use, I have optimized the print profile with the following settings:
- Wall Loops: 6 Walls for maximum tensile strength and durability.
- Warping Prevention: The first 20 layers are printed at a slow speed (20 mm/s) to ensure a rock-solid bed bond.
- Cooling Strategy: Fan speed is set to 0% for the first 5 layers, gradually increasing to 100% by layer 7 to prevent corner lifting.
- Infill: 15-20% Gyroid (The 6 walls provide most of the strength).
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)