Alternative Filter Holder Spray Booth Catweazle
Print Profile(1)
Description
Filter Insert for Catweazle's Spray Booth
Since the original filter holder of the spray booth was too unstable and fragile for me, I designed my own filter insert. This consists of two parts that are simply pushed into each other. If necessary, a drop of superglue is sufficient for fixing.
The filter mats are easily inserted into the circumferential edge groove. When inserting, ensure that the mesh faces the fans.
Update:
I have added the missing guide rails. These are placed left and right into the original guides and glued with a drop of adhesive. The guides facilitate the insertion of the filter and prevent air from being drawn past the filter at the sides. The guides have a bevel at one end, which must point upwards.
The filter inserts must be cut to the following size:
175mmx205mm
Many thanks also to Catweazle for his otherwise wonderful airbrush booth which can be found here:
https://makerworld.com/en/models/1305058-airbrushkabine-catweazle?from=search#profileId-1338125
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)