AJLStudio

cover

IMG_1536.jpeg

IMG_1538.jpeg

IMG_1542.jpeg

plate_1.png

plate_2.png

plate_3.png

IMG_1562.jpeg

Los ojos entran ajustados, pero alineándolos correctamente entran sin problema.

The eyes are a tight fit, but with correct alignment, they go in without a problem

Llavero multicolor. NO AMS 0.12mm layer, 2 walls, 8% infill

4f1ac31e56e1cfbd.jpeg

Los ojos entran justos, pero alineándolos bien no hay problema.

The eyes fit snugly but by aligning them well there is no problem

Multicolor. NO AMS 0.12mm layer, 2 walls, 8% infill

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.

This user content is licensed under the MakerWorld Exclusive License.

Este modelo de unos 8 cm forma parte de mi colección de animales con textura tejida, diseñada para imitar la apariencia de un peluche suave utilizando impresión 3D.El diseño combina una estética acogedora y adorable con una geometría pensada para facilitar la impresión y el montaje. Es ideal como elemento decorativo, figura de escritorio o para estanterías.El modelo está diseñado para imprimirse en varias piezas, permitiendo utilizar diferentes colores sin necesidad de AMS. Una vez impresas, las piezas deben montarse utilizando pegamento para obtener el aspecto final mostrado.&nbsp;<h2>Montaje</h2><ul><li>El modelo está dividido en varias piezas</li><li>Requiere pegamento para el montaje final</li><li>No incluye sistemas de encaje; las formas están pensadas para un montaje sencillo y limpio</li><li>Se recomienda presentar las piezas antes de pegar para comprobar la posición correcta</li></ul><boostme><boosttitle>Boost Me</boosttitle><boostcontent>Gracias por tu apoyo! </boostcontent></boostme>

This approximately 8 cm model is part of my collection of animals with a woven texture, designed to imitate the appearance of a soft plush toy using 3D printingThe design combines a cozy and adorable aesthetic with geometry engineered for easy printing and assembly. It is ideal as a decorative item, a desk figure, or for shelvesThe model is designed to be printed in several pieces, allowing the use of different colors without the need for an AMS. Once printed, the pieces must be assembled using glue to achieve the final appearance shown&nbsp;<h2>Assembly</h2><ul><li>The model is divided into several pieces</li><li>Requires glue for final assembly</li><li>It does not include interlocking systems; the shapes are designed for simple and clean assembly</li><li>It is recommended to dry fit the pieces before gluing to check the correct position</li></ul><boostme><boosttitle>Boost Me</boosttitle><boostcontent>Thank you for your support! </boostcontent></boostme>

Print Profile(2)

Description

Assembly

Comment & Rating (6)

License