Anatomical Heart Handbag - Free 3D Print Model

Search models, users, collections, and posts

Rmk

Fashion>Bags

IP Report

Print Profile(5)

All

P2S

H2S

H2D Pro

H2C

H2D

X2D

A2L

A1 mini

P1S

P1P

X1E

X1 Carbon

Ver.3[Latest], 0.2mm layer, 2 walls, 5% infill

Designer

7.4 h

1 plate

4.9(45)

Ver.3[A1 Mini, Latest], 0.2mm layer, 2 walls, 5% infill

Designer

6.7 h

2 plates

4.8(12)

Stand for Ver.3 Bag, 0.16mm layer, 2 walls, 4% infill

Designer

4.7 h

1 plate

5.0(2)

Ver. 2 [NO SILK], 0.2mm layer, 2 walls, 7% infill,with mods

Designer

11.9 h

1 plate

4.8(5)

Click to see more

Open in Bambu Studio

Boost

2730

7345

173

2.3 k

1 k

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

Round Magnet

Bambu Filaments

Select all

PLA Matte

Matte Charcoal (11101) / Filament with spool / 1kg

PLA Matte

PLA Basic

Description

Version 3 is now published.
What's changed:

Seamless outside print, no supports outside, only interior supports
Print time reduced by 5 hours, amount of plastic reduced because of removed supports and smaller size
Bag became smaller, almost without compromising inner volume.
Whole interior was reworked, walls became much thinner to increase inside space
Outside bag looks organic due to smaller size
Hinges are now printed separatly and inserted later (glue recommended, but holds well without glue also)
Magnets cuts for 8x3 and 8x2 mm

I found a bit uncomfortable to put this bag somewhere on the table, so I designed a stand for it to make it stay vertically. Stand is done in gothic cathedral style, print profile was added. On stand veins cut for better grip and it's easierer to align heart correctly.

*On the hinges you will notice very small bumps. Those bumps should be aligned with same holes on the walls on the heart, as they are designed to block hinges from moving outside/wobble. Add some glue as well for better hold, but they will hold good without any glue as well.

A sculptural heart-shaped handbag inspired by anatomical forms, combining medical realism with unusual design. This bag was done via Blender using Sculpting techniques.

Part of Heartbroken collection.

Features

Anatomically accurate geometry – detailed veins, arteries, and organic contours for a realistic look
Functional storage cavity – hollow interior for small personal items
Compact size – suitable for essentials (keys, cards, cosmetics)
Durable 3D-printed construction – lightweight yet rigid shell
Statement design – wearable art piece for fashion, cosplay, or display
Customizable – scalable size and color/material options depending on print settings

Check out my Anatomical Heart Jewelry Box model as well!

Boost Me (for free)

Thank you for your support!

Also check out my other collections, hope you enjoy.

If you need a commercial license, please use my patreon, etsy webstore or maker's world membership!

Membership

Commercial License Here

Join

Thank you for your support and wish you amazing prints!

Roman

anatomical heart purse

anatomical heart handbag

anatomical realistic bag

dark anatomical heart

dark

Comment & Rating (173)

@Rmk_k

Pinned by Designer

Third version of the bag contains major changes and updates. Fully reworked inner part - inside bag is same size as old one, outside it's almost twice smaller, which makes it more compact, better looking and more organic. Bag is now printed in separate parts: bottom, top and hinge. It allows to print almost without support and there are 0 supports on outside part of the bag, which makes it seamless outside. Magnets are still the same, 8x2 and 8x3mm. Because hinge is printed separatly, it became much tighther and wobble disappeared. I highly recommend to print in 3d version, this is definetely my favourite one. When combining all the parts: first combine the hinge, add drop of glue (it holds very well without it as well, but if you have - you can add), insert both of the bottom hinges inside 2 holes on the bottom bag part, then do the same with the top one. There are small "blockers" with a bit of an angle on the hinges, so you can slide them in and they won't come out

The designer has replied

@annanda

Hello, since it prints separately now, would it be possible to have a larger version divided into two plates? This way it could hold a cell phone and would be the perfect bag!! ❤️

Show original

@Rmk_k

Replying to @annanda :

Hi! I will try to recreate it to make it larger

@user_3874072566

Replying to @Rmk_k :

I'm holding out for the bigger version! So excited!

@c72merc

The print profile is no longer public

Perfect print!! I absolutely love how it turned out after a little painting and perma blood 💖

The profile uploader has replied

@Rmk_k

Thanks for sharing, looks stunning!

(Edited)

@sdemir

Hello, There is a fundamental design issue with the chain attachment system. The plastic ring/loop area where the chain connects is not properly engineered. The attachment point is too loose and not structurally controlled. Because of this, the product does not stay in a fixed vertical position when hanging. Instead of remaining stable, the bag moves freely: It tilts backward. It tilts forward. It does not stay balanced. The hanging position is unstable. The problem is not only about placement, but about the ring design itself. The current plastic loop system allows too much movement and does not provide a controlled hanging axis. The attachment mechanism needs to be redesigned so that the ring sits in a fixed and stable position, preventing forward/backward rotation. In its current form, the hanging system is mechanically unstable and requires redesign. Please review the attachment structure carefully

The designer has replied

@Rmk_k

Hi! Thank you for detailed review! I will work on and address those issues in the next update

@sdemir

Hello, I would like to inform you that the updated version of the bag has been tested, and the previous issues have been successfully resolved. The hanging system now works properly, and the bag remains stable when suspended. The forward/backward tilting problem is no longer present, and the overall balance has significantly improved. The attachment area feels much more secure and mechanically stable compared to the previous version. The product now performs as intended. Thank you for your revision and effort in correcting the design. I appreciate your support and cooperation. Best regards.

The designer has replied

@Rmk_k

thank you for reviewing it! I am happy that it works well now! enjoy!

@Rmk_k

I will share some photos of recent print here as well, this was printed from "with lifted base" print profile. The main difference between "with lifted base" and "without lifted base" is that bag is lifted about 1cm over the ground to avoid contacting with plate directly. The difference visually is seen on the last picture, where distant bag was printed without lifted base, and nearest (closest) was printed just now "with lifted base". Also some of supports could be removed as well to improve quality and save some material, but please keep the manually added supports near the base of the bag (around it), it will help you stabilize the print and avoid any fails. I will soon publish print profile with magnet insets for fixing the top part as well. Have a lovely day!

(Edited)

The designer has replied

@cookieologist

is there a version of this that is printed the other way? is there an option to have the linge part at more of a 90 degree angle so that it can be printed flat facing down? Looking forward to a magnet version!

@Rmk_k

Replying to @cookieologist :

Hi! I will upload option with magnet insets, where magnets should be glued, and another option with magnet insets, where there will be a pause almost at the end of the print so people can put magnets and then magnets will be covered under thin layer of plastic as well (basically invisible, seamless magnets, same way as i did here https://makerworld.com/en/models/2373365-tissue-box#profileId-2597854 ) Unfortunately I don't have an option with flat face down, as the hinge is sligtly pointing upwards, but that is a good point and I think I might make on of those as well! Thank you for the idea

@vivalabombshell

This is so cool. it printed great. the lack doesn't stay closed but it's not a big deal to me. I ran out of red a little over half way so that's why it's pink in the middle. Great job on this.

The designer has replied

@Rmk_k

Thank you for the comment and the image, looks amazing! In couple of hours I will publish version with insets for 8mmx3mm/8mmx2mm magnets, so it can stay closed (both with pauses for seamless print and without pauses so magnets should be glued), and reworked on sides loops for better balance

@vivalabombshell

Replying to @Rmk_k :

that's amazing ✨

@c72merc

Absolutely love this print!!! turned out fantastic 👏💖😍

The designer has replied

@Rmk_k

Wow, It looks stunning!!

@pfeiffer.desi

Print Profile

Ver. 2 [NO SILK], 0.2mm layer, 2 walls, 7% infill,with mods

A wonderful design! I tried printing it in TPU (30% size) - it works, but the hinge was very difficult to release and of course the many supports with TPU are a particular pain. :D I am now waiting for the "upside down" version so I only have to remove the supports from the inside and will try to make the hinge hollow so I can insert a metal rod. Then it will be a birthday present :)

The profile uploader has replied

Show original

@Rmk_k

Thank you for sharing!!

@user_3556394851

Boosted

Print Profile

Ver.3[Latest], 0.2mm layer, 2 walls, 5% infill

This print came out beautiful! I did onw in pink and black silk pla and one in red and black silk pla and they are amazing. I am obsessed with this print. Great job!

(Edited)

The profile uploader has replied

@Rmk_k

This looks amazing!! thank you for sharing the result! 😍

(Edited)

@LenniPrints

Hi. Can you share your silk settings?

@user_3556394851

Boosted

Replying to @LenniPrints :

for silk pla I usually lower the layer height to 0.16 and I slow down the outside wall speed to 50

(Edited)

@Skyrunner1833

Boosted

Print Profile

Ver. 2 [NO SILK], 0.2mm layer, 2 walls, 7% infill,with mods

This print is being given a 5 star rating despite my personal turnout of this file for these reasons: - First and foremost, the creator mentioned that this file was not yet recommended for silk PLA because of some of the things you may be seeing in my photos. He/she/they have mentioned they are working toward an update to include silk PLA. - The inclusion for magnets as well as the latch make it reliable (in my opinion) for its intended use. - The overall result is absolutely wonderful and I personally don't mind having to do some finishing work to bring it to life. - The included handles to attach a strap or chains is very helpful. (One thing I'm a bit afraid of since I printed it with PLA is how quickly they might break off though.) My only final thought is wanting to reprint this using PETG or a stronger filament to withstand the wear and tear it might endure if used as I would a purse. Additionally, the option to cut and resize it to make it a bit bigger would be ideal for phones.

The profile uploader has replied

@Skyrunner1833

Boosted

I was hesitant to try to cut and resize this model on my own simply because of the hinge on the model.

@Rmk_k

Thank you a lot for support and images! I will try to finish with Silk PLA ASAP, but the color and your print still look lovely!

@mimi.crea

Boosted

Print Profile

Ver.3[Latest], 0.2mm layer, 2 walls, 5% infill

The print is super cool, I had to sand the inside a bit so the hinge pieces would go all the way in. Very striking and the only bad thing is that the phone doesn't fit due to its shape. I've made a video on Instagram, follow me to see it @soy.mimicrea ❤️❤️

(Edited)

Show original

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under the MakerWorld Exclusive License.

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.

Related Models

Human Skull, Anatomically Correct

SF3DPrints

13.8 k

4.2 k

Anatomic Heart

sdillon030976

1.7 k

497

anatomical heart

heidiho

392

211

Priceless White-Winged Heart Handbag

pix11

330

874