Domelis

cover

front.jpg

side.jpg

Screenshot 2026-02-07 223515.png

plate_1.png

69b1110e7921b2a4.jpg

<h2>🖨️ Print Profile – Gura Gura no Mi-Style Devil Fruit (Fan-Inspired)</h2>This model is designed to balance clean surface finish, reliable printing, and easy color separation, making it suitable for standard FDM printers while remaining simple to assemble and display.<h3>🔧 General Notes</h3><ul><li>Two-piece model: fruit body + stem</li><li>Designed for multi-color printing or manual filament swaps</li><li>Smooth exterior surfaces optimized to reduce visible layer artifacts</li><li>Stem socket aligned for easy fit and positioning</li><li>Scales well for desk decor or display prints</li></ul><h3>⚠️ Supports</h3>Supports are recommended for:<ul><li>The stem (especially the curled tip)</li><li>Underside of the stem attachment point</li></ul>The fruit body typically does not require supports when printed upright.Use tree/organic supports at low density to preserve the surface texture.<h4>🛠️ Support Removal Tip</h4>Remove supports from the stem slowly using flush cutters. Avoid twisting the curled section, as thinner areas can flex or snap if forced.<h3>🎨 Material &amp; Color</h3><ul><li>Prints well in PLA or PLA+</li><li>Ideal for AMS or filament swaps</li><li>Light-colored filament recommended for the fruit body</li><li>Darker filament works well for the stem for contrast</li><li>Swirl texture remains visible even at standard layer heights</li></ul><h3>🧩 Post-Processing</h3><ul><li>Minor cleanup may be needed where the stem meets the fruit</li><li>Light sanding can smooth the stem base if desired</li><li>A small drop of glue can secure the stem if a permanent fit is preferred</li><li>Model is display-ready after basic cleanup</li></ul><h3>📏 Recommended Settings (Starting Point)</h3><ul><li>Layer height: 0.16–0.20 mm</li><li>Nozzle: 0.4 mm</li><li>Infill: 8–12% (Gyroid or Cubic)</li><li>Wall loops: 3</li><li>Top/Bottom layers: 4–5</li><li>Supports: Stem only (Tree preferred)</li></ul>These settings help maintain the smooth exterior while preserving the swirl detail.⭐ If this print worked well for you, consider leaving a Boost or rating — your support helps bring more fan-inspired designs to life!

0.2mm layer, 2 walls, 8% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

🍐 Gura Gura no Mi | Fan-Inspired 3D PrintBring a powerful relic of the seas to your collection with this fan-inspired Gura Gura no Mi Devil Fruit, designed as a bold, display-ready 3D print that highlights smooth pear-like shaping, deep swirl patterns, and a distinctive curled stem.&nbsp;🌀 Model DetailsTwo-piece design: fruit body + stem Ideal for multi-color printing or simple filament swaps Clean geometry designed for reliable printing and easy alignment&nbsp;✨ The rounded form and pronounced swirl texture give the model strong shelf presence while keeping it approachable and fun to print. Separating the stem from the fruit body allows cleaner color separation and smoother surface results.&nbsp;⚠️ Printing TipThe stem benefits from light supports. When removing supports, take your time and use gentle pressure, as the curled sections are thinner than the fruit body and may snap if forced. Small tools and careful cleanup are recommended for best results.&nbsp;⭐ If you enjoyed this print, consider giving it a Boost — your support really helps!<boostme><boosttitle>Boost Me</boosttitle></boostme>

Print Profile(1)

Description

Comment & Rating (1)

License

Related Models