Ant Model (Fast Print, No Support)
Print Profile(2)
Description
Boost Me (for free)
If you like this design, consider giving it a boost or leaving a comment — it really helps! 🙌
3D Ant Model (Fast Print, No Supports)
This is a sliceform-style 3D ANT Desk display model designed to print extremely fast and assemble into a clean desk display model.
All parts print flat and slide together into a sturdy ant shape.
No supports needed, no glue required — but you can glue it permanently if you want.
22 cm version
- Lenght: ~220 mm,
- Segment thickness: 2 mm,
- Print time: 2 plates, total 2h8m
- Filament used: ~65 grams
- Assembly time: ~15 minutes
- Supports: None
Printed on: Bambu Lab X1C, 0.16 mm print profile, Sunlu PLA+ Brown
11 cm version
- Length: ~110 mm,
- Segment thickness: 1 mm,
- Print time: ~34 minutes
- Filament used: ~9.5 grams
- Assembly time: ~15 minutes
- Supports: None
Printed on: Bambu Lab X1C, 0.16 mm print profile, PLA Matte Charcoal
Assembly: – Sliceform Ant
This model is designed to be assembled without glue. All parts slide into the slots and lock together by friction.
Assembly time: ~15 minutes
Difficulty: Easy
1. | 2. |
3. | |
4. |
5. |
6. | 7. |
Done!
Optional – Glue (Permanent Assembly)
The model is designed to work without glue, but if you want it fully permanent:
Add a tiny drop of glue in each slot after everything is aligned.
Membership
Subscribe for a Commercial License to sell physical prints of my models! License stays valid as long as the subscription is active.
© 2026 3Core
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)