Snow King Split Parts, Snow Cone Scepter is removable
Print Profile(6)
Description
The Snow King is here
Assembly Notes:
Align the eyes vertically with the eye sockets, press down firmly, no glue needed.
First, align the bottom of the nose with the groove and snap it in, then push the top of the nose upwards; it's very easy to install.
When installing the mouth, a little force is needed. The top of the mouth groove can be trimmed. Turn the head upside down, first snap in the left corner of the mouth, then work your way to the right, use force!
Place the tongue into the groove, press the left side first (position 1 in the diagram), then press the right side (position 2 in the diagram); it will easily press in.
Install the cape first, then the head! Cape installation is very simple: align the square part with the body's groove and press straight in.
Snow Cone Scepter. The cross-section of the rod needs to be aligned with the horizontal side of the snow cone groove, then press it in.
Finally, align the cross-section of the staff with the back of the Snow King's hand (the hand has a cross-section but it's not easy to see), and simply place it in. It should be easy; if you feel resistance, the angle is wrong.
Display:
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)