Knob-style Soldering Wire Clip

This model is a knob-style cable soldering fixture, designed for conveniently clamping cables and PCBs to assist in quick and easy soldering. Its dimensions are 75*50*35mm, with a clamping range of 0-16mm

It features fast printing, no supports, a wide opening, secure clamping, and convenient portability

Features: Compact and portable size, printing time less than 2H, filament usage less than 50g Clamping range 0-16mm, anti-slip jaw design, secure clamping Main body is Print in Place, bolt pitch 4mm, double-start thread design, smooth and fast opening/closing Replaceable solder collection box, quick-release vertical stand base for multi-purpose use Robust main body, centered jaws, a perfect balance of practicality and aesthetics After printing, screw in the bolt, install the limit buckle, and it's ready to use

Assembly method:

After printing, screw in the bolt until closed, install the limit buckle and solder collection box, and it's ready to use To disassemble, simply use a flat-head screwdriver to pry off the limit buckle

Additional accessories:

The print profile includes a separate vertical stand base for quick assembly and disassembly Considering not everyone needs it, it is uploaded as a separate print profile

Soldering clamp comparison:

Knob-style Soldering Clamp: Uses a bolt knob to provide clamping force Operation requires turning the knob, but clamping force is adjustable Print in Place, simple and easy to assemble Dimensions 75*50*35mm, clamping range 0-16mm Quick access: This model	Spring-type Soldering Clamp: Uses a spring to provide clamping force Requires only one-handed pressing for relatively fast opening and closing Print in Place, fewer parts Dimensions 75*50*32mm, clamping range 0-15mm Quick access: International Site、China Site	Press-type Soldering Clamp: Uses a torsion spring to provide clamping force Requires only single-finger pressing for relatively fast opening and closing Printed in parts, slightly more complex to assemble Dimensions: 68*60*53mm, opening angle 20° (end distance 11mm) Quick access: International Site、China Site

*The knob-style soldering clamp's opening/closing speed is not as fast as the spring-type, and the strength of overly thin bolts was also a challenge, which is why this idea was put aside in the early stages. Seeing that thread-driven mechanisms are quite popular in the community, I made design improvements to address the structural flaws. Regarding opening/closing speed, increasing the pitch on a thinner screw rod would reduce the thread contact surface, disrupting balance. I set the pitch to 4mm and adopted a double-start thread design. Regarding bolt strength, adding or removing holes in the middle during vertical printing generates more walls during printing, increasing bolt strength to a certain extent. By streamlining the number of parts, with the inherited Print in Place main body and the limit buckle providing a perfect finish, it offers a relatively perfect solution. Of course, after considering and testing materials such as PLA/PETG/ABS, and the multi-compatibility of A1/P1/H2 series printing, a balance was struck in terms of tolerances, without affecting functionality. It is perfectly capable for daily soldering and clamping, and I hope it can assist you!