ja2b

cover

20260209_211154.jpg

20260209_210811.jpg

plate_1.png

a386cec4b8e2b6e7.jpg

Supports : ❌ Aucun Assemblage : Aucun (print-in-place) Orientation : À plat sur le plateau<ul><li>Layer height: 0.2 mm</li><li>Line width: 0.4 mm</li><li>Infill: Gyroid – 5 %</li><li>Walls: 3 perimeters</li><li>Top / Bottom: 4 layers</li><li>PLA: 200–210 °C</li><li>Bed: 60 °C</li></ul>💡 Tip: use silk PLA or two-color filament for a stunning nested heart effect 💖

1 heart, filament economy

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Un fidget toy très plat composé de multiples cœurs imbriqués les uns dans les autres, offrant un mouvement fluide, doux et particulièrement satisfaisant. Son design fin et minimaliste en fait un objet discret, facile à transporter et agréable à manipuler.Conçu pour être print-in-place, ce fidget s’imprime sans support ni assemblage et fonctionne immédiatement après impression. La géométrie plate garantit une excellente compatibilité d’impression tout en conservant une bonne liberté de mouvement entre les différentes couches de cœurs.Supports : ❌ Aucun Assemblage : Aucun (print-in-place) Orientation : À plat sur le plateau<ul><li>Layer height: 0.2 mm</li><li>Line width: 0.4 mm</li><li>Infill: Gyroid – 5 %</li><li>Walls: 3 perimeters</li><li>Top / Bottom: 4 layers</li><li>PLA: 200–210 °C</li><li>Bed: 60 °C</li></ul>💡 Tip: use silk PLA or two-color filament for a stunning nested heart effect 💖

An very flat fidget toy composed of multiple hearts nested within each other, offering a fluid, soft, and particularly satisfying movement. Its thin and minimalist design makes it a discreet object, easy to carry and pleasant to handle.Designed to be Print in Place, this fidget prints without support or assembly and works immediately after printing. The flat geometry ensures excellent print compatibility while maintaining good freedom of movement between the different layers of hearts.Supports : ❌ None Assembly : None (print-in-place) Orientation : Flat on the plate<ul><li>Layer height: 0.2 mm</li><li>Line width: 0.4 mm</li><li>Infill: Gyroid – 5 %</li><li>Walls: 3 perimeters</li><li>Top / Bottom: 4 layers</li><li>PLA: 200–210 °C</li><li>Bed: 60 °C</li></ul>💡 Tip: use PLA Silk or dual-color filament for a stunning nested heart effect 💖

Print Profile(1)

Bill of Materials

Description

Comment & Rating (2)

License