Faucet Aerator Filter
Print Profile(1)
Description
This is a simple aerator filter for classic water taps.
It has an M24x1 thread (precisely M23.6) and the STL is a solid.
It should be printed with 0 top shell layers and 0 bottom shell layers, after which you can customize it by increasing or decreasing the infill.
For example, I found 25% rectilinear infill to work well.
If you don't know how to set the parameters in your Bambu Studio, you can download my print profile directly and change the infill percentage, it's very easy.
To install it, just screw it in without over-tightening. No tools or anything like that are needed, it's all done by hand!
I recommend printing it in PETG or ABS; PLA might deform with hot water.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (34)