Strong Parametric Angle Bracket | CUSTOMIZABLE
Print Profile(1)
Description
This is a parametric model of an angle bracket, which lets you print a mounting solution perfectly fitted to your application.
This piece is easily printable and designed to evenly distribute the forces, by printing the bracket laying on its supports.
Customizable parameters
Inner width (a) - the space intended for one hole, undisturbed by the inner offset.
Support width (b) - thickness of the support walls.
Inner offset (c) - distance between inner width start and the inside of a support wall.
Amount of holes WIDE (d) - amount of holes you want the bracket to have in width.
Amount of holes LONG (e) - amount of holes you want the bracket to have arm length wise.
Thickness (f) - thickness of the bracket core arms.
Screw hole diameter (g) - outside diameter of your screw's threads.
Screw cap diameter (h) - diameter of your screw's cap.
Screw hole tolerance (i) - how much bigger should the screw holes be than the screws.
Total arm length (j) - total length of the bracket's arms. You have to adjust this value to fit the amount of holes you want length wise (e).
Graphical presentation of given parameters
Printing tips
- lay the model on a flat side like a house (the front face side)
- 50% gyroid infill
- 5 walls
- 5 top and bottom surfaces
- use strong filament (for example PET-G)
Boost Me (for free)
If you liked the model consider giving me a Boost! It's free, you can do it, but don't have to :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)