Demon Slayer - Zenitsu Hueforge lithophane
Print Profile(1)
Description
Boost Me (for free)
Demon Slayer - Zenitsu Hueforge lithophane
Layer height of 0.08mm with 100% infill and a first layer height of 0.16mm
Model size is 200x200mm
You can print at a higher layer height than the base thickness of 0.48mm
Maximum allowed thickness is 2.32mm and actual thickness is 2.32mm
This print uses 4 types of filament:
PLA BambuLab Basic Black Translucency value TD: 0.6
PLA BambuLab Basic Pumpkin Orange Translucency value TD: 5.5
PLA BambuLab Basic Yellow Translucency value TD: 6
PLA BambuLab Basic Jade White Translucency value TD: 5
Filament change instructions:
Start with Black
Change to Pumpkin Orange at layer #8 (0.72mm)
Change to Yellow at layer #15 (1.28mm)
Change to White at layer #18 (1.52mm) until the end.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)