Handle for A1 and A1 mini build plate
Print Profile(1)
Description
Boost Me (for free)
If you like my project, you can support me for free with a Boost. Thank you
I made this handle to facilitate the positioning of the print plate on the heated bed and primarily to avoid accidentally touching the print plate with fingers and transferring dirt from fingers to the plate. This handle is suitable for both Bambulab A1 and A1 mini.
Installation is very simple: move the print plate all the way forward and you will see a hexagonal screw in the center on the underside. Unscrew it and keep it, then install the handle and screw in a screw, which you will find in the screw kit that came with your printer, which serves as a reinforcement for the AMS-BT3-12 screw (or similar). Once tightened, you're done. If you appreciate the handle, I would be happy to receive comments, appreciation or even boosts, and of course suggestions for improvements.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)