Print Profile(1)
Description
Boost Me (for free)
If you like, please give me Boost!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 126.33x196mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.83998mm
#000000 PLA+ Elegoo Black Transmission Distance: 0.2
#91202b PLA+ Elegoo Fire engine red Transmission Distance: 5.5
#ff8000 PLA+ Sunlu Orange Transmission Distance: 5
#fff2d5 PLA+ Elegoo Beige Transmission Distance: 5.6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Fire engine red
At layer #12 (1.04mm) swap to Orange
At layer #16 (1.36mm) swap to Beige for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)