Secondary Monitor Stand, Display Stand, Floating Stand, Portable Screen Stand
Print Profile(3)
Description
The secondary screen stand is fixed via the main screen stand
Boost Me (for free)
The secondary display can be mounted to the stand via VESA standard screw holes
Supports various VESA mounting patterns
The stand can be directly fixed to the desktop using the provided base
The secondary screen stand can be extended infinitely, allowing you to print multiple joint arms as needed
More secondary screens can be added by replacing the optical shaft with a longer one
The secondary screen can rotate to adjust between portrait and landscape modes
Supports A1 mini printing
Requires M3 nuts, M3x11 double-pass brass standoffs, M3x12 countersunk screws, M3x15 countersunk screws, M3x25 countersunk screws
2mm diameter, 8mm long cylindrical pins
M8x12 ball plunger screws (tightness can be adjusted manually during installation)
One 10mm diameter, 100mm long cylindrical pin; two 80mm long cylindrical pins
Damping grease (optional, apply to rotating shafts to adjust tightness)
10mm inner diameter, 15mm outer diameter, 12mm long bushing (optional, can also be replaced by the provided printed part)
M10x30x2.5 washer (optional, can also be replaced by the provided printed part)
License
Comment & Rating (0)