seattlegirl2

Kailh Switch

cover

Screenshot 2026-02-15 at 9.10.52 PM.png

Screenshot 2026-02-15 at 9.44.58 PM.png

Screenshot 2026-02-15 at 9.45.10 PM.png

Screenshot 2026-02-15 at 9.45.21 PM.png

Screenshot 2026-02-15 at 9.45.35 PM.png

Screenshot 2026-02-15 at 9.45.43 PM.png

Screenshot 2026-02-15 at 9.45.49 PM.png

Screenshot 2026-02-15 at 9.45.55 PM.png

Screenshot 2026-02-15 at 9.46.03 PM.png

plate_1.png

plate_2.png

a6c1717b16ff4138.png

<p>There are five options for the “face” included on the same plate. You can mix and match.  You can use the paint tool to change colors of the eyes, mouth, tail, sunglasses and bows.  You can have the bow a different color of the same. The base is included on a separate plate but you can pull it over as needed.  No supports needed. Print with the caps facing down for best results. You will need one Kailh switch per clicker. set it horizontally over the hole in the base and make sure it is level then push it all the way in. Once it&#39;s flush you can push the cap on easily. Glue is optional before putting the cap on. Enjoy and give mea. follow or review if you have time please!</p>

Bunny Fidget Clicker

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoy this model, I would appreciate any boosts you can send my way. I am a STEM/Math teacher who loves creating to share here.</boostcontent></boostme>

Peeps Bunny Fidget Clicker

ASIA

Print Profile(1)

Bill of Materials

Description

Comment & Rating (28)

License

Related Models