HERO KATTIVI ORCS WARGAMES

I am a dad of two beautiful girls and I enjoy letting them discover the multiverse through 3D printed nerd objects
This is one of the models from my collection, which I share with those who love 3D printing, also to receive constructive advice and improve more and more
I am a big fan of Bambu Lab and all my prints are made with P2S and A1 mini

I do test prints at a reduced scale (8 cm) to test the stability and output of the model
But there is an important thing: if you print it larger, around 15 cm, in addition to gaining details you also gain ease of printing
My advice? Enlarge it as much as you want
Only a minimum basic knowledge of slicing is needed If you have doubts, write to me and I will gladly help you

For testing, I printed it at 8 cm:
PLA Basic white
0.16 extra fine
hybrid tree supports
10 mm outer brim
object spacing 0 mm

The supports are very delicate They are removed without damage, but one at a time, slowly, with tweezers and patience There's no need to go Rambo on the support... or you'll cry

If you want to collect them all... come here (the trap is already set):

https://makerworld.com/en/@Gara/upload

Technical notes (the truth, not poetry)

I prefer to print single-color and paint after priming with acrylic markers
The colored images are just examples of coloring: then everyone goes according to personal taste
The design comes from an AI generation (Tripo), manually refined and tested in FDM to ensure real printability
The "real" photos are the single-color white ones

The part that decides whether you print or curse: bed adhesion

I use CryoGrip Pro Frostbite and the adhesion is so strong that the prints seem to have taken out a mortgage on the bed: they never detach
I mainly use Bambu filaments and have no problems

If you have a different setup:

Focus first and foremost on adhesion
Use dry and quality filament
Do things cleanly

You will see that "mysteriously" everything will start to work much better