Sennheiser MD419 Microphone Holder
Print Profile(3)
Bill of Materials
- Heated Insert (6mm) x 1: Or if you can find choose the standard mic socket (1/4" or so)
- M4 Screw Hex Socket x 2:
- M4 Wing Nut x 2:
- (M6) Hex Socket Screw x 1: Like your heated insert
Description
This is a Holder for the vintage Sennheiser MD419.
It includes
- the gripper so the thing that grabs the mic directly which I highly recommend to print out of TPU.
- the holder so the general thing that fixes the gripper in place
- an adapter to connect the holder to a 20mm rod
- A base that can be filled with beton for stability
How to build:
If you decide to use the base: Fill it with beton
Find a 20mm diameter rod and crew it to the base from the underside.
You need to insert two M4 screws from the inside into the gripper and fix it to the holder woth preferably two wing nuts.
You should also insert a heated insert into the Holder to connect it to the adapter or different equipment.
Done. Have Fun
I wish you a lot of fun and would love to hear from your experiences.
Boost Me (for free)
If you appreciate my work and would like to thank me for the hours I put into my designs, please consider boosting me. Thanks
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)